Broadcast SRC-32 Uživatelský manuál stáhnout pdf (Strana 3)

INSTALLATION

Please read the Broadcast Tools GPI 32 manual before installing this

device as it will provide an outline of how the device functions and its

requirements. The following is an excerpt from the Broadcast Tools

manual.

The GPI-32 interfaces 32 optically isolated inputs to a users PC's RS-232 or USB port. The

serial data conforms to our standard switcher PIP format. The GPI-32 is equipped with dual

plug-in Euroblock connectors and two independent DB-37 connectors that may be interfaced

directly to the DB-37 connectors located on the StarGuide II/III relay cards. Additional

features: dual RS-232 connectors, one for daisy-chaining multiple units on the same legacy

serial port and a DB-9 to interface to our supplied USB adapter; LED indicators for power and

input activity; twin power connectors allowing up to four units to be driven off of one power

transformer. The GPI-32 is supplied with two 3-foot mating DB-37 connecterized cables, serial

cable and wall transformer. The GPI-32 is powered by a surge protected internal power

supply. The GPI-32 may be mounted on the optional RM-3 mounting shelf.

Maintain proper installation techniques including UPS, static and

lightning protection and proper wiring standards. If you are running

extender cables, be sure to take RF, line voltage, distances and proper

shielding techniques into consideration as this can affect the

performance of both out software and this device.

BEFORE POWERING UP THE GPI 32

There are two Phillip #2 screws on the top of the Broadcast Tools unit

that will need to be removed to adjust the “DIP” switches. Switch 5

and 6 should be set in the up or on position and remaining switches in

their default or off state. Replace the cover when complete.

BEFORE YOU CONNECT THE GPI 32 TO YOUR COMPUTER VIA

USB TO 9 PIN CABLE

You can save time by downloading the Virtual Com Port driver (VCP) to

a folder on your ONAIR or Logger computer. “Unzip” or “Extract” the

USB Serial driver files before rebooting your computer with the

1 2 3 4 5 6 7 8 ... 18 19

Žádné komentáře

Broadcast SRC-32 Uživatelský manuál Strana 3